Hydrophilic swellable mastic, adhesives&nbspand other products.

Fixing Glue

Adhesive for Hydrophilic Waterbars

Fixing Glue provides fast and strong adhesion of HydroBar Original and HydroBar Evo to concrete and steel substrates. The fast skin formation and curing allows concrete casting after only a few hours. Fixing Glue is completely weather resistant once cured.

Fixing Glue can easily be applied with a standard caulking gun. For optimal adhesion, the glue must be applied on the full contact area of the HydroBar.

After gluing, press the HydroBar down briefly to ensure full contact.

Size: 290 ml Cartridge, 12 cartridges per box

Application of Fixing Glue

No primer is required when applying Fixing Glue on a clean surface (either concrete, plastic or steel).

For the best adhesion, a solid, clean, dust, oil and fat-free surface is recommended. If required, cleaning with acetone or isopropanol is recommended.

Optimal adhesion is achieved when the full contact area of the HydroBar is covered with glue.

After gluing, the HydroBar must be pressed down, to ensure full contact with the Fixing Glue beneath it, thus achieving optimal adhesion.

Watch our HydroBar Evo installation video

Play Video about YouTube video - installation of HydroBar Evo

Please note: This information is for general guidance only. It does not constitute as a detailed guide for a specific application. Due to the unique circumstances of every site, each installation must be assessed on a project-by-project basis as there may be many variables to consider. Independent professional advice should be sought on each installation. The information is to the best of Manorteq Ltd.’s knowledge and belief, accurate and reliable of the date indicated. However, no representation, warranty or guarantee is made to its accuracy, reliability, or completeness.