Freezteq Breathable
Render System

Following the application of Freezteq Original, moisture and salts above the Freezteq treatment line will still remain within the wall. These will want to come out of the structure and so careful consideration has to be made on how and when to reinstate finishes.

In most cases, if the Freezteq treated wall is reinstated with the same type of materials that were removed, such as gypsum-based plasters, problems can soon manifest again if insufficient time has been given to allow the wall to dry out. How quick a wall naturally dries is dependent on many variables, such as the thickness of the wall, how saturated it is etc. In almost all cases, the natural drying out of the wall though will take a considerable time.

 Attempting to reinstate with the wrong type of finish before the conclusion of the drying out period will most likely result in further debonding of the new finishes and unsightly salts re-appearing. Applying the Freezteq Breathable Render System however not only allows the latent moisture above the Freezteq treated line to escape, it also allows the remaining salts within the wall to continue to be released into the base layer without debonding the new finishes.